Green Y Type Double-Pass Splitter with Aluminium Plated Copper Inlet

This green Y type double-pass splitter is a two-way valve connector designed to divide a single water supply into two separate outlets. It is supplied as one plastic Y-shaped connector with four seals and two nipple joints, so the fitting arrives with the small parts needed for connection. The body is made from plastic with TPR double encapsulation, the inlet is aluminium plated copper, and the water outlet is zinc alloy with electroplating treatment. Its compact size of 94 x 91 x 55mm makes it suitable for garden watering, hose irrigation, and other outdoor water lines where a single tap needs to feed two directions. The green colour helps it stand out when stored with other garden equipment. No additional pressure, flow, or temperature ratings are stated in the source information.

Features and Construction

The splitter uses a combination of materials for different parts of the connector. The main body is plastic with TPR double encapsulation, which describes an outer layer over the plastic body. The inlet is made from aluminium plated copper, and the outlet is zinc alloy with an electroplating finish. These details are limited to what is stated; no further performance figures are provided.

Material and Build

The body is plastic with TPR double encapsulation, forming a Y-shaped double-way valve connector. TPR double encapsulation means the plastic body has a TPR outer layer. The inlet is aluminium plated copper, while the male teeth zinc alloy water outlet has electroplating treatment. The connector is supplied with four seals and two nipple joints, which are the only included accessories stated. No claims are made about pressure resistance, flow rate, or lifespan beyond the listed materials and construction.

Size and Practical Fit

The splitter measures 94 x 91 x 55mm, making it a compact fitting for a garden hose setup. This size allows it to sit between a tap and two outgoing lines without taking up much space. The Y shape separates the two outputs from one inlet. Because no hose diameter or thread size is given, check compatibility with your existing fittings before purchase. The green colour is the only colour option stated.

Uses and Placement

This two-way connector is intended for splitting a water supply into two directions. It can be used in garden watering, hose irrigation, and similar outdoor water tasks. The materials and size suit practical placement near a tap or along a hose line. The supplied seals and nipple joints are part of the connection setup, but no specialist tools are mentioned in the source.

Event or Professional Use

For event watering, grounds maintenance, or similar tasks, the splitter allows two hoses or lines to run from one source. The plastic body with TPR double encapsulation and the aluminium plated copper inlet are the stated construction details. The zinc alloy outlet with electroplating treatment is the outgoing connection point. Since no flow or pressure ratings are provided, use it only within the conditions supported by your existing hose system.

Everyday Home Use

In a home garden, the Y type double-pass splitter can feed two watering lines from a single outdoor tap. The four seals and two nipple joints are included to help with connection. The 94 x 91 x 55mm size keeps the fitting compact, and the green colour makes it easier to find among other garden items. Store it away from frost after use, and drain any remaining water to help maintain the stated materials.

Benefits and Buying Value

The main practical benefit is the ability to split one water supply into two outlets using a single connector. The supplied seals and nipple joints reduce the need to source small parts separately. The stated materials cover the inlet, outlet, and body. Because no price, savings, or competitor comparison is given, value is based on the product's own construction and included parts.

Reuse and Low Maintenance

The splitter is a reusable connector when handled according to its stated materials. Rinse it after use and drain any remaining water before storage. Keep it away from frost to avoid unnecessary strain on the plastic and metal parts. The four seals and two nipple joints are included, so replacements are not mentioned. No specific maintenance schedule, cleaning product, or lifespan is stated in the source information.

Why Choose This Product

Choose this splitter if you need a Y-shaped two-way connector with a plastic body, TPR double encapsulation, an aluminium plated copper inlet, and a zinc alloy outlet with electroplating treatment. It comes in green, measures 94 x 91 x 55mm, and includes four seals and two nipple joints. These are the concrete details available. No additional certifications, performance ratings, or pack counts beyond the stated contents are claimed.